Top Gear Fun

Are you looking for simple tips about how to get rid of your car’s stereo? Then look no farther! Be it a double DIN or a single din, you can do it in just 5 simple steps. If you’d like to know more, then you must read this text.

For vehicle owners who have to remove their factory stereo for replacement or repairs have to do some steps. The standard size of the DIN is 2 inches by 7 inches, and is often found in cars, SUVs, and light vans. Larger vehicles and luxury cars have a double-sized stereo than standard vehicles – this is named the double DIN. If you do not understand how to remove your double DIN, then you can hire an automobile audio engineer to get the job done for you.

Before starting, here are the things that you will be needing:

1. Screwdriver

2. Trim panel removal tool

3. Pliers or adjustable wrench

Here are the instructions:

1. To get access to the battery terminals, lift your car’s hood. By using an adaptable wrench, loosen up the bolt that secures the wire to the negative terminal. Remove the cable from the battery and put it to a secure place. Go inside your automobile.

2. Take away the panels from the dash. You can do this by following the instructions found in your car’s manual.

3. Remove the screws and bolt at the corners of the double DIN head unit with the Phillips-head screwdriver or socket and driver. There are some automobiles that need some specialised extraction tools. For those auto brands that like Mazda, Audi, and Ford, use the tools into the slots of the unit’s face. Pull the unit from the dock sufficiently good to reach the cable antenna and wiring connected to the back of the stereo unit.

4. Take away the wirings that are hooked up to the outlets at the back of the unit. The wirings could have release mechanisms that must definitely be engaged before unplugging the cables. Take a look at the mend manual for any precise directions before you pull the wire connectors from the outlets on the rear panel of the unit.

5. Disconnect the antenna cable lead from the outlet on the lower-left corner of the stereo’s rear panel. Put aside the panel in a secure place.

These are the 5 straightforward steps concerning how to remove a double din or car stereo. If you’re uncertain concerning how to do it, then you can hire someone or ask for help from your friend. Good luck!

Timothy J. Crone is a pro on all types of car stereo sound system. He owns a blog that offers free info on double din head unit. You can check out his hottest overview about JVC KW-XR810 stereo system. You can follow the link to read the complete overview.

Tags: car, car stereo, car stereo system, cars, din, double din, head unit

This entry was posted by Manueel Jacky on Wednesday, January 18th, 2012 at 3:38 pm and is filed under Cars. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.